Assisted versus added control
make the learning transfer explicit.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →20 · KNOWLEDGE AREA
Drill Library
Purposeful practice tasks connected to observable outcomes.
Bank exit gate
make exit control the measure of the turn.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Baseline–change–return
determine whether a cue or terrain change actually helps.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Bump-Side Banked Turn
Selecting a wider turning spot and using a bump's side as a bank.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Carved Pairs with an Organising Interval
Develop clean connections while preserving each known arc and final stop.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Carved Traverse
Holding an edge across a gentle slope and inspecting the resulting narrow track.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Chatter Phase Investigation
Test loading, support, surface and equipment hypotheses before prescribing a stronger cue.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Compare Transition Strategies
Comparing an extension-based task with a flexed-transition task on familiar mellow terrain.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Contact-outcome check
distinguish intended absorption from unintended launch.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Contact-to-Ordinary Bridge
Verify that a laid-turn exit supplies a functional opposite entry before adding second contact.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Controlled Straight Glide
A repeatable straight glide with a deliberate start, stable travel and controlled finish on suitable terrain.
Explore in: First Day → Independent Resort RidingDrill LibraryAssessments, Progression Pathways & Tools
OPEN ENTRY →Corridor traverse comparison
separate edge support from bump absorption.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Crest–descent–dip observation
locate a timing error after a crest.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Distribution versus Twist: Separate Tests
Distinguish along-board support, different-foot tilt and longitudinal bend.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Early Return to Ordinary Riding
Build recovery while support and movement range remain available.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Early Useful Support, Gradual Demand
Test earlier edge development without replacing it with an unsupported dive or a long inactive pause.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Entry–two turns–exit briefing
ensure the rider has a complete plan.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Equipment–movement separation
avoid attributing every slide to dull edges.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Eurocarve Clearance Exploration
Checking toe clearance in the proposed laid position before riding it.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Exit-heading comparison
distinguish closure from emergency braking.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Feature–outcome comparison
prevent a pumping cue from being detached from its terrain.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →First Controlled Nose Press Pathway
An ordered sample route connecting controlled travel, balance, practice tasks and a Nose Press entry.
Explore in: Flatground & ButteringDrill LibraryAssessments, Progression Pathways & Tools
OPEN ENTRY →Fore/aft Balance
Managing the rider’s relationship to the board’s lengthwise support so the intended movement remains controlled.
Explore in: Rider–Board–Snow FundamentalsFlatground & ButteringDrill LibraryGlossary & Terminology
OPEN ENTRY →Gentle Linked Edge Rolls
Linking shallow edge changes on mellow terrain and using the snow trace to check carving.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Grip-Loss Branch Test
Distinguish unsupported balance, tail departure, surface mismatch and suspected contact.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Grounded Extension-Based Pair
Develop a modest higher transition without a hop or locked position.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Grounded Flexion/Retraction-Based Pair
Time leg shortening with transition rather than hold a permanent crouch.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Grounded Roller Absorption Study
Applying absorption concepts to a small, familiar, fully visible roller while aiming to keep board contact.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Heel Arc: Support and Impulse Test
Identify whether rearward sitting, hand reach or rotary disturbance causes a heel-side failure.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Hold the Corridor
Repeating turns within a chosen width while varying size.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Leg-Length Reserve Rehearsal
Find useful flexion/extension range while preserving room for correction.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Lower-Body Garland
Partial turns with the knees and feet contributing to redirection.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Lower-demand soft-snow comparison
assess whether a demanding tilt is contributing to disruption.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Measured redirection
distinguish a useful pivot from an uncontrolled kick.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Method, Orientation and Phase Identification
Use attributed terminology without confusing labels, setup and timing.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Minimum-effective adjustment
find whether excessive aft posture is masking the actual problem.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Moderate Range and Smoother Loading
Manage demand with available joints instead of a fixed low pose or late shove.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Modest Inclination and Joint-Based Tilt Comparison
Learn when inside movement supports the arc and when it exceeds available support.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Moving Press Drill
A moving practice task connecting controlled travel with a deliberate press and ride-away.
Explore in: Flatground & ButteringDrill LibraryAssessments, Progression Pathways & Tools
OPEN ENTRY →No-Contact Heel-Side Lowering
Develop heel lowering with a coordinated pelvis/trunk relationship.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →No-Contact Toe-Side Lowering
Develop supported lowering without chasing snow contact.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Oblique ridge crossing
make sequential contact visible.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →One Variable at a Time
Keeping terrain and turn goal constant while adjusting timing, then intensity, then duration separately.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →One-cue paired turns
reduce overload and identify a useful timing cue.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →One-event comparison log
make a vague complaint actionable.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Optional Contact versus Reaching
Distinguish purposeful touch from a movement that creates loss of support.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Pitch-change single turn
detect retreat at the moment terrain steepens.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Planned Skid–Edge–Skid Segment
Choose a blended outcome and retain an intentional exit from carving.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Push-Pull Timing Study
Analysing a verified demonstration using flexion, rotation and extension timestamps.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Quiet-Arm Orientation Rehearsal
Distinguish head, shoulder and pelvis movement and find a usable coordinated range.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Readiness Lane and Deliberate Exit
Establish the controls and space needed to end an edged task intentionally.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Regular–Switch Comparison
Repeating a simple carved task in both stances.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Release–Entry Component Repair
Repair blocked old-edge release and disruptive new-entry tail throw.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Reserve-range pass
identify whether the rider runs out of flexion or extension.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Route and Exit Planning
Identifying the intended path, turning space, stopping option and exit before a short practice section, then comparing it with the actual route.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Route-choice audit
connect terrain reading to movement demand.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Runout map and review
test line planning rather than bravery.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Short Heel J-Carve
Join controlled along-board travel to a rounded heel-edge arc.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Short Heel-Side Contact Window
Integrate heel support, intentional low touch and a controlled return.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Short Toe J-Carve
Join supported toe engagement to a rounded path without a hand-contact target.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Short Toe-Side Contact Window
Integrate supported toe lowering, optional contact and early recovery in one arc.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Single Turn with Sideslip Pause
Individual heel-side and toe-side turns linked by controlled sideslip pauses that are gradually shortened.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Small Coordinated Rotation Turns
Transfer orientation control without throwing the board across its path.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Static Edge-Angle Exploration
Exploring edge engagement through joint movements before adding travel, comparing toe-side and heel-side balance.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Stationary Press Drill
A stationary practice task used to observe deliberate nose or tail loading without travel.
Explore in: Flatground & ButteringDrill Library
OPEN ENTRY →Timing and Coordination Practice
An exercise family using counting and follow-the-leader tasks to vary turn timing, symmetry and rhythm.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Toe Arc: Supported Feet and Hands-Clear Test
Identify waist collapse, tiptoe and reach-induced support loss.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Toe-Edge Bump Traverse
A toe-edge traverse through bumps used to practise absorption before adding turns.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Track Evidence by Phase
Distinguish pure segments, brushed segments and intentional blends without posture-based labels.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Transition-only focus
identify whether disruption occurs at release or re-engagement.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Turn–settle–turn
make readiness for the next turn observable.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Two arcs, one planned finish
separate momentum preservation from loss of speed control.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →Two-Arc Connection Test
Test whether the first finish actually supplies the next entry.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Two-Contact Pair with a Planned Endpoint
Link individually mastered laid tasks while protecting final recovery.
Explore in: Carving & Technical RidingDrill Library
OPEN ENTRY →Two-turn route rehearsal
correct late turn placement.
Explore in: All-Mountain TechniqueDrill Library
OPEN ENTRY →